Home Link

Accessories

We offer a wide assortment of accessories to enhance our product line. Programmable timer controls, installation tools, fixture shields, repair parts and wire complete the product line to meet the needs of our dealers and installers.

Click here to see our copper finishes.

Page 1 | 2 | 3

S1F – Full Wrap Shield

• Design: Solid Copper Full Glare shield for our PM1 Series directional fixtures. This shield is designed for keeping light from the source from being seen. The 1H fixture is not included.
• Finishes Available: Polished, Satin, Antique
• Fixtures: All PM1 Series fixtures (1H and 1T)
S1FL – Full Wrap Shield (Long)

• Design: Solid Copper Full Long Glare shield for our PM1 Series directional fixtures. This shield is designed for keeping light from the source from being seen. The 1H fixture is not included.
• Finishes Available: Polished, Satin, Antique
• Fixtures: All PM1 Series fixtures (1H and 1T)
S1H – Half Wrap Shield

• Design: Solid Copper Half Glare shield for our PM1 Series directional fixtures. This shield is designed for keeping light from the source from being seen. The 1H fixture is not included.
• Finishes Available: Polished, Satin, Antique
• Fixtures: All PM1 Series fixtures (1H and 1T)
S1HL – Half Wrap Shield (Long)

• Design: Solid Copper Half Long Glare shield for our PM1 Series directional fixtures. This shield is designed for keeping light from the source from being seen. The 1H fixture is not included.
• Finishes Available: Polished, Satin, Antique
• Fixtures: All PM1 Series fixtures (1H and 1T)
MR Series Clip-on Glare Shield (MREB)

• Design: Solid Brass clip-on glare shield for our flat cut MR Series bullet fixtures. This shield is designed for keeping light from the source from being seen. MR fixture is not included.
• Finishes Available: Polished, Satin, Antique
• Fixtures: All flat-cut MR Series fixtures
Grasslin Plug-in Timer (GRT)

• Design: Replaceable 24-Hour electromagnetic plug-in timer is easy to program and has 15 minute programming resolution using captive trippers. Manual override and includes polarized 2-conductor plug and receptacle.
• Specifications: 120 VAC input, switch rating: 15A @ 125 VAC, 1250 watt maximum
Magnetic Circuit Breaker (Mag-B)

• Design: Replacement 25A magnetic circuit breaker for transformers
• Models: For all MTS, EMTS, MTTS, and MTH series transformers
PC10 (Photocell)

• Design: Replaceable plug-in photocell with 10’ 18/3 cable and for plug & play setup on all MTS and EMTS transformers. Can be hard wired for all other transformers. Comes with adjustable swivel base for easy positioning and heavy duty thermal bi-metal switch for a 45 second time delay to eliminate unwanted lamp cycling caused by sudden changes in ambient light. Includes ½” NPT threaded base for mounting.
• Specifications: UL Listed, polycarbonate housing, 0.9 watt power consumption @ 120 VAC, cadmium sulfide cell light sensor.
PC6 (Photocell)

• Design: Replaceable plug-in photocell with 6” 18/3 cable and for plug & play setup on all MTS and EMTS transformers. Can be hard wired for all other transformers. Comes with adjustable swivel base for easy positioning and heavy duty thermal bi-metal switch for a 45 second time delay to eliminate unwanted lamp cycling caused by sudden changes in ambient light. Includes ½” NPT threaded base and nut for mounting.
• Specifications: UL Listed, polycarbonate housing, 0.9 watt power consumption @ 120 VAC, cadmium sulfide cell light sensor.

Home Link

Products Link

Showcase Link

Dealers Link

About Us Link

Contact Us Link

©2009 P.M. Lighting, LLC. All rights reserved. Privacy Policy.